Dustless Hardwood Floor Refinishing Union County NJ
Free Dustless Hardwood Floor Refinishing!
dustless hardwood floor refinishing! Some Times “ the hard wood floors you have been looking for ”
are already there! and the good news is, Huggins wood Floors offers dustless hardwood floor refinishing
at no additional charge!
Maybe you have discovered a once beautiful hardwood floor under some recently
removed carpets? or maybe you are moving into a home in which the floors have seen better days? Maybe
even your floors are in decent shape, but you just want to change the color?
At Huggins Wood
Floors we specialize in bringing those old tiered floors back to life! With dustless hardwood
floor refinishing, we can repairing and or refinishing your floors to better then new condition.
no need to replace good hardwood flooring because of dents, scratches, chips or discoloring.
Traditionally sanding and refinishing hardwood floors has been an extremely dusty process,
creating a mess in your home and clean up headaches that feel like they never end. Not
to worry! at Huggins Wood Floors we utilize a state of the art dustless
hardwood floor refinishing system, which consists of powerful vacuums (either trailer
mounted or exterior stand alone units) located outside of your home. These powerful vacuums
are connected all of our sanding equipment and capture all Airborne dust
generated during the sanding and refinishing process.
Here is how dustless hardwood
floor refinishing works!
Dustless hardwood floor refinishing in action!
We offer free, in-home estimates
and design consultations and complete a explanation of our dustless hardwood floor refinishing system.
Because the choices in colors, textures and styles are so numerous, by spending some time
with you and establishing your needs, tastes and style. We will then create a hardwood floor
that best suites you, your budget and your expectations. We look for any areas that need
to be repaired or replaced, water damage, dents and deep scratches that need extra attention during
the dustless hardwood floor refinishing process. Than We will provide an on-site assessment, address
any potential issues, answer all of your questions and walk you through our dustless hardwood
floor refinishing process.and provide you with a no obligation written price quote for refinishing
the floors in your home. Just call 908-232-6600
Below, we explain how a transformation is made
possible during our dustless hardwood floor refinishing process.
If you have carpet on your hardwood floors at this
time, the first step is to remove it. We provide complete carpet removal surface, including
the disposal of all related materials.
time, all repairs, which often require the replacement of existing boards with undamaged, reclaimed
or new wood, occur before the sanding process.
To remove the floor finish, including any build up of wax or dirt, we use coarse
grit sandpaper, working up to a finer grit. Thoughtful sanding will ensure the minimum
amount of actual wood is removed from your floors. The depth of the sanding will be influenced by
the overall condition of the floor including the existence of deep scratches, dents
Our dustless hardwood floor refinishing system
ensures dust, finish, dirt and wax is contained at the sanding source before becoming airborne.
Keeping your home clean and free of contaminants.
the entire hardwood floor with an abrasive screen blends the remaining fine sanding marks
to make them virtually invisible to the unaided eye.
this point, if a stain has been selected, the staining process begins. To help choose the
color that best fits your style; we will install a medium size test area on your floor.
We maintain an inventory of all Minwax stain colors in our vans which allows us to provide
several color samples on your floor. You will know exactly what the final outcome
will be for the colors your may be considering – no trying to guess off little
stain charts or sample boards.
choice of either 3 coats of professional grade oil-based polyurethane or 4 coats of the best water-based
polyurethane finish are applied over the course of the next several days. Drying times
will vary depending on your choice of stain color, oil- or water-based polyurethane,
and weather conditions.
Between each coat of finish, the floors will be buffed
with an abrasive screen and the perimeter of the floors hand-sanded in preparation for the next
In every case, after we have refinished your floors, we will provide you with specific
guidance before you plan to move back your furniture. Given that area rugs cover larger
sections of floor, we recommend that they remain off the still-curing floors for 2-4
weeks. Huggins Wood Floors for more than 15 years. Discover the difference expert
advice and personalized services make by partnering with us
Sanding DCS…What and Why?
DCS stands for Dust Containment Sanding. Why is
it revolutionary? Not only does it save you time, it is the healthiest available option for you, your family and
even your pets. DCS eliminates airborne particles which traditional sanding methods cannot. With DCS you will
not have dust nestling in your air ducts or lingering in your lungs. Particulate matter won’t mess up your
home furnishings, or settle into your new glossy coat of finish. It’s the safe and easy choice.
E.F.C. offers the most innovative DCS design. The Bona Atomic Trailer System is Bona‘s
most powerful dust containment system. It is trailer-mounted, and industrial size. It attaches to a gas powered
engine outside of the home, which significantly increases airflow and dust extraction.
Sanding – Yes, It Exists!
The days of hanging plastic, covering every surface,
and vacating your home for a dusty nightmare are over. Bona‘s innovative dust free sander, the Bona Atomic
DCS, connects a powerful vacuum motor to sanding equipment. The combination virtually eliminates airborne dust
generated while sanding. At the same time, Bona‘s Atomic Dust Containment Systems are the most advanced and
powerful dust containment systems in the world. They are capable of reducing dust far beyond even what traditional
What to Expect on the Job Before Sand & Refinish/
Before you begin, you should list your expectations and research
your needs. Educate yourself on the process and products you’d like to use. Once you know your expectations,
needs and products, you will feel comfortable and confident about the investment you are making, and you can begin
getting quotes. The cost of the job will vary, depending on the contractor’s expertise, quality of work,
and the products used. Some estimates are itemized, and some are comprehensive totals for the scope of the work. Just
remember that estimates are just that – ESTIMATES. Everything promised by the contractor should be included
in the final contract. Warranties and guarantees, work hours and project duration should also be discussed and
included. You should also ask your contractor for a portfolio, specification sheets or brochures on products to
be used. If someone in the home has chemical sensitivities, ask your contractor for a copy of the MSDS (Material
Safety Data Sheet) for all the products being used. Your physician can then advise accordingly.
What to Expect on the Job During
Potential delays are
out there. If you can’t determine what products are currently on your floors, it could lengthen the process.
Also, temperature and relative humidity can affect your floors’ dry times. The standard for a hardwood floor
is at least three coats. This consists of one seal coat (which may be the stain) and two coats of finish. Additional
coats of finish may be applied depending on need. There is no need to vacate your home. Bona systems have low-VOC’s,
no harmful fumes and fast dry times. You will be back on your floor in no time. Of course, Bona Systems are GREENGUARD
certified for indoor air quality, making them safe for your family and home. Bona’s systems are also safe
for your pets. However, it is a good idea to keep them off the floors until the finish is fully cured. This minimizes
contamination, and prevents dirt and hair from collecting in the polyurethane coating of your floor.
What to Expect on the Job After?
Bona Systems minimize
clean-up. Since sanding is dust-free, there is no time wasted hanging and removing plastic. A floor’s finish
is susceptible to scuffing and scratching until it is fully cured. Yet, your floor can typically be walked on with
stocking feet in just 3-4 hours. Furniture can be placed back on the floor (not dragged) in 72 hours. Area rugs
can be put down after one week – when the finish is fully cured. Maintenance depends on the amount of traffic
you have in your home. If you have children and pets, you will want to clean more regularly. We recommend dusting
your floors with a dust mop daily, or every other day. You should also clean your floors regularly with a waterborne,
non-toxic formula specifically formulated for hardwood floors. The Bona Hardwood Floor Mop is an easy and effective
tool to start with!
Choosing the Right Help
industry professionals to assist you takes time and patience. Because every situation is different, it is vital
to be well-informed and do the necessary research. Find a contractor you are comfortable working with. Selecting
the right dealer for materials is also important. You should purchase your hardwood floor from a specialized dealer
who not only sells flooring but can also advise you on achieving your desired result according to your budget,
priorities, tastes and vision.
Industry First: Bona offers a complete hardwood
floor finishing and care system that is GREENGUARD Indoor Air Quality Certified. The certification assures professionals
and consumers unsurpassed durability, beauty and environmental responsibility for hardwood floors.
Bona’s waterborne floor cleaners are safe for floors, families, and the environment and GREENGUARD Children
& Schools Certified. Bona’s specially-developed non-toxic and biodegradable formula also limits the harmful
effects of downstream pollution.
Breathe Easier: Bona waterborne finishes
have no toxic fumes and low VOC’s so they are healthier for your family, pets and the environment. Additionally,
there is no need to vacate your home during the finishing process due to fast dry times and easy water clean-up.
Our Swedish waterborne technology highlights the true beauty and elegance of the wood and provides the ultimate
in durability. It, too, is GREENGUARD certified.
No Dust!: Bona’s trailer-mounted Bona Atomic Dust Containment
System is the most forward thinking innovation in the industry and the world. The powerful system evacuates airborne
dust generated by the sanding process (no more plastic on the furniture!). Not only is it GREENGUARD Indoor Air
Quality Certified, but it also virtually eliminates lingering dust in your air-ducts.